Skoda Yeti 2015 Operating Instructions Manual page 116

After switching off the auxiliary heating, the coolant pump still runs for a short
period.
System settings

Read and observe and
The following menu items can be selected from the Aux. heating menu item in
the MAXI DOT display (depending on the vehicle equipment).
Day of the wk. - set the current day of the week
■
Running time - Set the required running time in 5 minute increments. The
■
running time can be 10 to 60 minutes.
Mode - Set the desired heating/ventilation mode
■
Starting time 1, Starting time 2, Starting time 3 - for each pre-set time, the
■
day and the time (hour and minute) can be set for switching on the auxiliary
heating. An empty position can be found between Sunday and Monday when
selecting the day. If this empty position is selected, the activation is per-
formed without taking into account the day.
Activate - Activate pre-set mode
■
Deactivate - Deactivate pre-set mode
■
■ Factory setting - Restore factory setting
Back - return to main menu.
■
Only one programmed pre-set time can be active.
The last programmed pre-set time remains active.
After the auxiliary heating activates at the set time, it is necessary to pre-set a
time again.
If the pre-set menu is closed by selecting the Back menu item or if no changes
are made on the display for more than 10 seconds, the set values are stored,
but the pre-set time is not activated.
An indicator light on the button  is illuminated when the system is running.
The running system deactivates after expiration of the operating period or can
be deactivated earlier by pressing the button to directly switch on/off the aux-
iliary heating  or by using the radio remote control.
on page 112 first.
Radio remote control

Read and observe and
Radio remote control » Fig. 119
Aerial
A
Warning light
B
Switch on the auxiliary heating

Switch off the auxiliary heating

The transmitter and the battery are housed in the housing of the remote con-
trol. The receiver is located in the interior of the vehicle.
When the battery is fully charged, the range of the remote control is a few
hundred metres. Obstacles between the radio remote control and the vehicle,
bad weather conditions and a weaker battery can clearly reduce the range.
To switch the auxiliary heating on or off, hold the remote control vertically,
with the aerial » Fig. 119 pointing upwards. The antenna must not be cov-
A
ered with the fingers or the palm of the hand during this process.
The auxiliary heating can only be switched on/off safely using the radio re-
mote control, if the distance between the radio remote control and the vehicle
is at least 2 m.
After pressing the button, the warning light in the remote control gives the
user different kinds of feedback.
Display warning light » Fig. 119
B
Lights up green for around 2 seconds.
Lights up red for around 2 seconds.
Fig. 119
Radio remote control of the aux-
iliary heating
on page 112 first.
Meaning
The auxiliary heating has been
switched on.
The auxiliary heating has been
switched off.
Heating and air conditioning

113