Skoda Yeti 2015 Operating Instructions Manual page 209

Light with LED diodes
›
Unlock the bulb holder using the locking latches in the areas
marked with arrows and remove the bulb holder from the light.
›
Turn the respective light bulb » Fig. 205
remove it from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the bulb holder in the light.
The lamp holder must engage audibly.
Note
Visit a specialist garage if an LED diode is faulty.
206
Do-it-yourself
» Fig. 205
until it stops counter-clockwise and