Replacing the bulb for the fog lights
Fig. 201 Principle sketch: Remove the number plate light / replace the
bulb
Read and observe
and
First remove the grille for the fog lights and before changing bulbs
on page 203 and / or
» Fig. 199
on page 203.
Remove the headlight
›
Unscrew the two bolts
» Fig. 201
A
›
Remove the headlight in the direction of arrow
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Pull the plug on the lamp base.
›
Turn the lamp socket to the stop in the direction of arrow
pull it out.
›
Insert the bulb holder with the new bulb into the headlight and turn counter
to the direction of arrow
as far as the stop.
3
›
Attach the connector on the lamp base.
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 201
and tighten.
›
Attach the connector on guard carefully
›
Insert the protective grille and press it in.
›
Replace the plastic cover and press into the guard
The protective grille must engage firmly.
1)
Applies to vehicles with parking assistance system.
204
Do-it-yourself
on page 202 first.
with the screwdriver
» page
.
1
.
2
» Fig. 201
3
» Fig. 200
on page 203
1)
» Fig. 199
on page 203
CAUTION
For vehicles with parking assistance, we recommend that after changing the
light bulb in the fog lights, the system is checked by a specialist.
Replacing the bulb for the licence plate light
Fig. 202 Remove the number plate light/replace the bulb
» Fig. 198
Read and observe
›
Open the boot lid.
183.
›
Push in the lamp in the direction of the arrow
The lamp comes loose.
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
and
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
Check that the light is securely inserted.
2
.
.
1)
and
on page 202 first.
» Fig.
202.
1
and remove it.
2
.
3
.
1