Table of Contents
Advertisement
›
Disconnect the relevant connector with the light bulb in the direction of ar-
row
» Fig.
197.
1
›
Remove the connector to the bulb in the direction of arrow
›
Remove the connector.
›
Insert the connector with the new bulb so that the fixing lug
bulb into the recess on the reflector.
›
Insert the respective protective cap
clockwise until it stops.
Note
We recommend you have the bulb replacement performed by a specialist ga-
rage.
Remove the protective grille for fog lights
Fig. 198 Guard: Version 1/version 2
Read and observe
and
›
Undo the protective grille in the direction of the arrow
clamp for removing the wheel trims
›
Remove the protective grille.
.
2
A
» Fig. 196
on page 202 and rotate it
on page 202 first.
» Fig. 198
» page
183, Vehicle tool kit.
Remove the protective grille for fog lights - sensor plug for
parking assistance
adjusts the
Fig. 199 Guard: Version 1/version 2
Fig. 200 Remove the plug
Read and observe
using the
›
Remove the plastic cover for the guard in the arrow direction
the bow to pull the full wheel covers
›
Remove the remaining part of the grille.
›
Pull the latch out of the connector in the direction of arrow
›
Undo the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
The connector is installed in reverse order.
and
on page 202 first.
» page
183, Vehicle tool kit.
.
3
Fuses and light bulbs
» Fig. 199
using
» Fig.
200.
1
.
2
203
Advertisement
Chapters
Table of Contents
