Table of Contents
Advertisement
WARNING
Having the correct tyre inflation pressure is always the driver's responsi-
■
bility. Tyre pressure should be checked regularly
The system cannot warn in case of very rapid tyre inflation pressure loss,
■
e.g. in case of sudden tyre damage.
Save tyre pressure values
Read and observe
on page 142 first.
Procedure for storing the tyre pressure values
›
Inflate all the tyres to the specified pressure.
›
Switch on the ignition.
›
Press
» Fig. 143
and hold the symbol key.
The warning light
in the instrument cluster lights up.
An acoustic signal and the control indicator provide information about the
storage of the tyre pressure values.
›
Release the symbol key.
Always save the tyre pressure values in the system if one of the following
events occurs.
›
Change of tyre inflation pressure.
›
Change one or more wheels.
›
Change in position of a wheel on the vehicle.
›
Illumination of the warning
light
WARNING
Before storing the pressures, the tyres must be inflated to the specified in-
flation pressure
» page
177. If the wrong pressure valuesare stored, the
system may not issue any warnings, even if the tyre pressure is too low.
142
Driving
» page
177.
Fig. 143
Key for storing the pressure val-
ues
in the instrument cluster.
CAUTION
Save the tyre pressure values every 10,000 km or 1x annually to ensure correct
system functioning.
Advertisement
Chapters
Table of Contents
