›
Insert the vehicle key into the slot on the bottom of the cover in the arrow
area
» Fig.
186.
›
Fold the cover upwards.
›
Release the door handle.
›
Insert the vehicle key bit into the lock cylinder and unlock or lock the vehicle.
Pull on the door handle and replace the cover in its original location.
CAUTION
Make sure you do not damage the paint when performing an emergency lock-
ing/unlocking.
Locking the door without a locking cylinder
Fig. 187 Emergency locking: Left/right rear door
An emergency locking mechanism is located on the face side of the doors
which have no locking cylinder, it is only visible after opening the door.
›
Remove the cover
» Fig.
187.
A
›
Insert the vehicle key into the slot and turn in the direction of the arrow
(sprung position).
›
Replace the cover
.
A
196
Do-it-yourself
Unlock the boot lid
The boot lid can be unlocked manually.
›
Fold the rear seat backrest forward
›
Insert a screwdriver or similar tool into the opening in the trim
far as the stop.
›
Unlock the lid by moving it in the direction of the arrow.
›
Open the boot lid.
Selector lever-emergency unlocking
Fig. 189 Selector lever-emergency unlocking
›
Firmly apply the handbrake.
›
Insert a flat-head screwdriver into the gap in the arrow range
and lift the cover in arrow direction
›
Use a finger to press the yellow plastic part in the direction of the arrow
›
At the same time, press the locking button in the selector lever and move
the selector lever to position N.
If the selector lever is moved again to position P, it is once again blocked.
Fig. 188
Unlocking the boot lid
» page
83.
» Fig. 188
» Fig. 189
1
.
2
as
.
3