The fire extinguisher is attached by two straps in a holder underneath the driv-
er's seat.
Removing/attaching
›
Loosen the two straps by pulling the buckles in the direction of the arrow
» Fig.
169.
›
Remove the fire extinguisher.
›
Secure the fire extinguisher by placing it back into the holder and fastening
with straps.
Please read carefully the instructions which are attached to the fire extin-
guisher.
The fire extinguisher must be checked by an authorised person once a year.
The national legal requirements must be observed.
WARNING
The fire extinguisher must always be secured safely so that they do not
come loose when making an emergency braking or in a vehicle collision
which could cause injuries to occupants.
Note
The fire extinguisher must comply with national legal requirements.
■
Pay attention to the expiration date of the fire extinguisher. If the fire extin-
■
guisher is used after the expiration date, its proper function is not assured.
The fire extinguisher is part of the scope of delivery in certain countries only.
■
Vehicle tool kit
Fig. 170 Vehicle tool kit
The tool kit is housed in a box in the spare or emergency wheel compartment
or in this storage space.
Depending on the vehicle configuration, it may not contain all the compo-
nents listed in the on-board tool kit.
Screwdriver
1
Key for removing and installing the tail light
2
Adapter for anti-theft wheel bolts
3
Towing eye
4
Clamps for removing the wheel trims
5
Jack with sign
6
Wheel wrench
7
Extraction pliers for wheel bolt caps
8
Replacement bulb set
9
Breakdown kit
10
Emergency equipment and self-help
183