CYBEX 770T Owner's Manual page 43

Add/Delete Channels (ATSC and DVB-T)
1. Tap ▼ to select Add/Delete Channels.
2. Tap ► to enter the Add/Delete Channels menu.
To add or delete an analog channel perform the following procedure. To enable or disable digital
channels, go to step 7.
3. Tap ◄ or ► to select the desired analog channel.
4. Tap ▲ or ▼ to highlight Add/Delete Analog Channel.
5. Tap ◄ or ► to select Added or Deleted.
6. Tap the Setup
until the programming menus disappear. If there are more analog channels to be added or
deleted, repeat steps 3 through 5.
7. Tap ▲ or ▼ to highlight Enable/Disable Digital Channel.
8. Tap ► to select Enable/Disable Digital Channel. If there are not any channels programmed
in the Service Level, "No Channels Present" will appear in the menu.
9. Tap ▲ or ▼ to highlight the digital channel that needs to be enabled or disabled.
10. Tap ◄ or ► to select Enable or Disable.
11. Tap the Setup
Cybex Owner's Manual
Add/Delete Channels
■ Analog Channel
■ Add/Delete Analog Channel
■ Enable/Disable Digital Channel
Position: ▲ ▼
Exit: SETUP
icon to return to the previous menu. To exit, Tap the Setup
icon to return to the previous menu.
Added
►
Next: ◄ ►
43
2
icon