CYBEX 770T Owner's Manual page 24

Install optional A/V or CSAFE cables
1. Insert the CSAFE coupler into the mounting plate by hooking the lower tab into the mounting
plate and snapping in the upper tab.
1
2
5
2. Unthread the nut at the end of the A/V cable.
1
3. Insert the A/V cable into the D-shaped hole in the mounting plate on the front of the unit.
1
2
4. Thread the nut removed in step 2 onto the A/V cable by hand.
5. Install the A/V cable to the mounting plate on the front of the unit using a 14 mm open end
wrench.
6. Plug the CSAFE cable into the CSAFE coupler on the front of the unit.
Cybex Owner's Manual
3
4
6
2
3
4
5
6
Item Description
1
Upper tab
2 Mounting plate
3 6 CSAFE coupler
4 Lower tab
5 Installed
6
Front of unit
Item Description
1 A/V cable
2 Nut
Item Description
1
2 6
3
4
5
6
24
A/V cable hole
CSAFE coupler
Nut
Mounting plate
A/V cable
CSAFE cable, Red