4. Remove the right top step by inserting a long 3/8" drive socket extension into the right top step
and prying backwards.
1
5. Remove the right top step.
6. Route the power cord through the hole in the upright support and behind the lower cover.
7. Adjust the power cord length entering the frame to allow for the power cord to be plugged into
the power cord inlet. Do not plug the power cord in at this time.
Cybex Owner's Manual
2
3
Item Description
1
Hole in Upright Support
2
Power Cord Inlet
3
Lower Cover
4
Power Cord
19
Item Description
1
3/8" Drive Socket Extension
2
Right Top Step
1
2
4