CYBEX 770T Owner's Manual page 18

Install power cord
Decide whether you will plug the power cord into a power outlet near the front of the treadmill or the
back of the treadmill. Follow the corresponding routing procedure below. Do not plug the power cord
into a power outlet at this time.
WARNING: Shock and electrocution hazard.
Route power cord so it does not become damaged.
•
Do not allow cord to be pinched or interfere with movement of treadmill.
•
Front routing: Skip to page 25, section "Install the uprights"
Back routing:
1. Remove the four screws securing the front cover to the base using a Philips screwdriver.
2. Remove front cover.
3. Remove the two screws securing the right end cap using a Philips screwdriver.
1
Cybex Owner's Manual
1
2
2
Item Description
1 Front cover
2 Screws (4)
Item Description
1 Screws (2)
2 Right end cap
18