CYBEX 770T Owner's Manual page 39

Channels
1. Tap ▲ or ▼ to select Channels.
2. Tap ► to select access Channels menu.
ATSC Monitor
■ Signal
■ Auto Program
■ Add/Delete Channels
■ Parental Control
■ Default Channel
■ Channel Lock
■ Channel Memory Override
Position: ▲ ▼
Exit: SETUP
3. Tap ▲ or ▼ to select settings.
4. Tap ◄ or ► to adjust settings.
Channel settings
Signal (ATSC only)
Auto Program
Manual Program
(DVB-T only)
Add/Delete Channels
Parental Control
Default Channel
Channel Lock
Channel Memory
Override
Cybex Owner's Manual
Channels
Cable STD
Disabled
Enabled
Next: ◄ ►
Select Air, Cable STD, Cable IRC, or Cable HRC.
See Below
See Below
See Below
Block channels based on TV ratings.
Select channel to display on power up. Select from available channels or
last.
Select Enabled or Disabled. If enabled only one channel is shown, user
cannot change channels.
Select Enabled or Disabled. If enabled allows user to select any available
channel.
■ Auto Program
► ■ Manual Program
► ■ Add/Delete Channels
► ■ Parental Control
Last ■ Default Channel
■ Channel Lock
■ Channel Memory Override
Position: ▲ ▼
Exit: SETUP
39
DVB-T Monitor
Channels
►
►
►
►
Last
Disabled
Enabled
Next: ◄ ►