CYBEX 770T Owner's Manual page 25

Install shield
Tighten the seven screws securing the shield to the base using a Philips screwdriver.
1
2
Install the front cover
Perform this step if you removed the front cover. If not, skip to next step.
Install, but do not fully tighten the four screws securing the front cover to the base using a Philips
screwdriver.
1
Install motor cover
1. Place motor cover on carpeting or other soft surface. Do not scratch top of hood cover.
2. Insert the four plastic connectors into the motor cover.
1
2
Cybex Owner's Manual
1
2
3
3
1
2
2
25
Item Description
Base
Screws (7)
Shield
Item Description
Front cover
Screws (4)
Item Description
1 21 Plastic connectors (4)
2
Motor cover