8. Adjust the power cord length exiting the rear of the frame. Store extra power cord behind lower
cover.
9. Install the right top step by placing in position and inserting a long 3/8" drive socket extension
into the right top step.
10. Pry the long 3/8" drive socket extension forwards to secure the right top step.
11. Using a Phillips screwdriver, install the two screws securing the right end cap.
Install the uprights
1. Install the short and long standoffs to the right side of the base using a 3/4" open end wrench.
1
2
2. Thread two bolts into the base by hand. Do not fully thread bolts into the base.
1
2
3. Place the right upright onto the base assembly and the bolts installed in the previous step.
Cybex Owner's Manual
1
2
3
4
3
20
Item Description
1
3/8" Drive Socket Extension
2
Right Top Step
Item Description
1
17
2
18
3
4
Item Description
1
4
Upright (Right shown)
2
Base
3
16
Bolt, Whiz lock (2)
Standoff, short
Standoff, long
Base
Front of unit