Denon AVR-5803 Operating Instructions Manual page 99

[31 Operating devices for which the preset memory is set
For details, refer to the individual devices' operating instructrons.
% Note that some devices and some buttons may not be operable.
If this case, use the learning function to store the device's remote control signals rn the K-8000.
0 Press an icon in the icon display sectron to select the device to be operated.
@I Use the Q and D buttons in the page display sectron to display the page on which the button you want to
operate is located.
@I Press the button you want to operate to send its remote control signal.
l
The displayed button names are the same as the default button names.
l
The button names for buttons from which signals can be transmitted are displayed in black characters.
l
The button names for buttons at which no transmission codes are set are displayed in gray characters.
l
No transmission codes are set for buttons which do not have button names.
NOTES:
l
The signals registered at the buttons (the presence or absence of transmission codes) depend on the preset
code which has been set.
l
If the contrast is strong, it may be difficult to read gray characters. If this is the case, adjust the contrast so
that gray characters are easier to read.
* The names of buttons on the devices you are operating with the K-8000 may differ from the names of the
buttons on the FTC-8000. If so, the names can be changed for greater ease using the procedure described in
section "Changing the button names" (page 30).
W TV preset memory buttons
Ic
0
0
VOL.
0
DOWN
0
2
0
5
0
6
0
+10
0 "u"p'.
0 3
0 6
0
9
0
INPUT
n
DVD (DVD player and DVD change1 r) I
1 CANCEL 1 1 ENTER ]
[hlENUI[]j[
000
000
000
weset memory buttons
Transmission codes
of independent buttons
CHA : TV channel
CHI : TV channel
VOLA : Main volume of AV amplrfier
VOLI : Main volume of AV amplifier
MUTE : Muting of AV amplifier