Denon AVR-5803 Operating Instructions Manual page 37

Av surround receiver
Hide thumbs Also See for AVR-5803:
Table of Contents

Advertisement

l
On-screen display signals
Signals input to the AVR-5803
On-screen display signal output (MONITOR output jacks1
I I
VIDEO signal input jack
S-video signal Input jack
VIDEO signal output jack
(vellow)
bellow)
S-wdeo signal output lack
Component video signal
omut
lack
1
r:>
x
0
')
C'
2
\
:.:
i'
.,
: :
131
0
I
Cl
I
X
I
::I
I
--\ I /
I
(12: Signal
x: No signal)
!c: On-screen signals output
x: On-screen signals not output)
NOTE:
l
When a component video signal is input and when the "Video Input Mode" is set to the component frxed mode at system setup, the on-
screen display is only displayed when the System Setup, Surround Parameters and On Screen buttons are operated.
I7
8
REMOTE CONTROL UNIT
l
The included remote control unit (RC-8000) can be used to operate not only the AVR-5803 but other remote control compatible
DENON
components as well. Furthermore, it is equipped with a function for learning the control signals of remote control units of other manufacturers,
so it can also be used to operate non-DENON remote control compatible video components.
l
For details, refer to the separate (supplied)
RC-8000 operating
instructions.
l
Point the remote control unit at the remote sensor on the main unit
as shown on the diagram.
l
The remote control unit can be used from a straight distance of
approximately
7 meters/22
feet from the main unit, but this
distance will be shorter if there are obstacles in the way or if the
remote control unit is not pointed directly at the remote sensor.
l
The remote control unit can be operated at a horizontal angle of up
to 30 degrees with respect to the remote sensor.
NOTES:
l
It may be difficult to operate the remote control unit if the remote
sensor is exposed to direct sunlight or strong artificial light.
l
Do not press buttons on the main unit and remote control unit
simultaneously.
Doing so may result in malfunction.
l
Neon signs or other devices emitting pulse-type noise nearby may
result in malfunction,
so keep the set as far away from such
devices as possible.
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents