Denon AVR-5803 Operating Instructions Manual page 10

l
When making connections, also refer to the operating instructions of the other components
l
The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack.
l
Some video sources with component video outputs are labeled Y, Pa, PR, or Y, Ca, CR, or Y, R-Y, B-Y. These terms all refer to component video
color difference output.
COMPONENT
1 Connecting a DVD player 1
DVD IN jacks
l
Connect the DVD player's color difference
(component) video output jacks (COMPONENT VIDEO
OUTPUT) to the COMPONENT DVD IN jack using 75 Q/
ohms coaxial video pin-plug cords,
l
In the same way, another video source with component
video outputs such as a DlV/DBS tuner, etc., can be
connected to the TV/DE% color difference (component)
video jacks
-1 1 Connecting a monitor TV /
MONITOR OUT jack
l
Connect the TV's color difference (component)
video input jacks (COMPONENT VIDEO INPUT)
to the COMPONENT MONITOR OUT tack ustng
75 Q/ohms coaxral video pin-plug cords.
l
The color difference input jacks may be indicated differently on sorme
TVs, monitors or video components ("PR, PB and Y". "R-Y, B-Y and Y",
"CR. CB and Y",
etc.). For details, carefully read the operatrng
rnstructions included with the TV or other component.
MONITOR OUT jacks
The AVR-5803 is equipped with a function for up-converting video signals.
Because of this, the AVR-5803's MONITOR OUT jack can be connected to the monitor (TV) with a single cable offering a higher quality connection,
regardless of how the player and the AVR-5803's video input jacks are connected.
Generally speaking, connections using the component video jacks offer the highest quality playback, followed by connections using the S-Video
jacks, then connections using the regular video jacks (yellow).
% If the AVR-5803's MONITOR OUT jack is not connected to the monitor (TV) using the component video jacks, connect the player to the AVR-
5803's video input jacks using either the video jacks (yellow) or the S-Video jacks. The video signals will not be output if the player and the
AVR-5803 are only connected with the component video jacks.
10