Denon AVR-5803 Operating Instructions Manual page 51

When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal that is played:
(0 THX Surround EX (THX Ultra2 Cinema)
$ Home THX CINEMA
3; THX 5.1
:e'; THX DSCRT 6.1, THX MTRX 6.1
When the HOME THX CINEMA mode is set when a DVD is played, check the DVD player's digital output setting and change the setting to one
for which Dolby Digital and DTS bit stream signals can be output ("bit stream", for example).
111 Playing sources recorded in Dolby Surround in the Home THX Cinema surround mode
o> Select the Input source
ca Set the input mode to "AUTO"
2 Select the Home THX Cinema mode.
HOME
THX-$ [F
wlaln UnItI
iRemote control mti
1 -(ff
4
I
I
2
Play a program source with the ml--l mark
3
l
For operating instructions, refer to the manuals of the
respective components.
I-@-
4
Adjust volume.
h~*STERI'OLLiM,lE
6
5
Display the surround parameter screen and set the parameters according to the source
' THX
<NON MTRX>
AFDM <cXr>
rlefault Yes<
6
0,) Select the parameter. @? Select the setting.
7 Press the "SURR. PARA" button to complete the setting.
Iuwa-m
f
NW-
I
+
51