Denon AVR-5803 Operating Instructions Manual page 60

The Dolby Headphone mode is set when headphones are connected to the PHONES jack while rn the DOLBY/DTS SURROUND mode
When the SURR. PARA. button
IS pressed, the parameter
selection screen appears.
DOLBY HEADPHONE
Yes4
2
$> Select the parameters.
MlKlU
?
cl-
+
(Remote control unit)
3
Press the "SURR. PARA" button to complete the setting
2-
Parameters
MODE:
DHI . . . . . . . . . ..Reference room (small room with weak reverberations)
DH2 . . . . . . . . . ..Live room (room with a bit stronger reverberations than DHl)
DH3 . . . . . . . . . ..Large room (larger room than DHI, offers a sense of distance and sound diffusion effects)
BYPASS . . . ..Stereo sound.
DECODER:
Select this when playing analog, PCM or other 2-channel sources.
The signals are converted into multichannel signals using the decoders shown below and played In the Dolby Headphone mode.
PL II C .._..... Dolby Pro Logic If Cinema mode
PL II M Dolby Pro Logic II Music mode
NEO:6 C.....DTS NEO:6 Cinema mode
NEO:6 M....DTS NEO:6 Music mode
OFF............The signals are played in the Dolby Headphone mode as such (2 channels).
- Recording -
When RECOUT mode is set to "SOURCE", with this amplifier signals encoded in the Dolby Headphone mode can be output from the recording
output terminals and recorded on another recorder. (see page 43)
60