Denon AVR-5803 Operating Instructions Manual page 52

Av surround receiver
Hide thumbs Also See for AVR-5803:
Table of Contents

Advertisement

Surround
parameters
(1:
DECODER:
Select the decoder to be used when playing 2-channel sources in the Home THX Cinema mode.
PL ll C . . . ..The signals are decoded in the Dolby Pro Logic II Cinema mode before undergoing THX processing.
PL II E . . . ..The signals are decoded In the Dolby Pro Logic emulation mode before undergoing THX processing.
NEO:6 C ..The signals are decoded in the NEO:6 Cinema mode before undergoing THX processing.
MODE/S6
CH OUT:
Select the surround back channel playback method or mode.
NORMAL (ON) . . . . . ..This is the recommended
play mode for using the surround back channel when DTS NEO:6 is selected.
NORMAL (OFF) . . . . ..This is the recommended
play mode when Dolby Pro Logic II is selected. The surround back channel is not played
Checking
the input
signal
The input signal can be checked by pressing the remote control unit's ON
SCREEN button. (See page 41.)
SIGNAL:
Displays the type of signal (DTS, DOLBY DIGITAL, PCM, etc.).
fs:
Displays the input signal's sampling frequency.
memote COiltrOl ur11t)
FORMAT: Displays the input signal's number of channels.
"Number of front channels/Number
of surround channels/LFE on/off"
"SURROUND"
is displayed for 2-channel signal sources recorded in Dolby Surround.
OFFSET
Displays the dialog normalization offset value. (See page 55.)
FLAG:
Displays the special identification signal recorded in the input signal. (See page 51.)
"MATRIX"
is displayed when matrix processing
is conducted
on the surround back
channel, "DISCRETE" IS displayed when discrete processing is conducted.
Not displayed when no identification
signal is recorded.
In addition, screen information
is displayed in the following
order when the ON SCREEN button is
pressed repeatedly:
OSD-1
Input signal
OSD-2
Input/output
OSD-3
Auto surround mode
OSD-3 M 7 Tuner preset statlons
NOTE:
OSD-3:
This is displayed when the auto surround mode is set to "ON" and the input mode is set to "Auto".
It is not displayed when the input mode IS set to "Analog" or "EXT. IN-1 ,-2".
i:l:.
1 SURROUND
SIGNAL:DOLBY
DIGITAL
~RMAT i i%?
i
OFFSET:t4dB'
m:DTS
ES DSCRTG. 1
SIGNAL:DTS
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents