Denon AVR-5803 Operating Instructions Manual page 56

When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the
audio delay to delay the sound and synchronize it with the picture
The audio delay setting is stored separately for each input source.
1
3; Select the input source.
lNP"TSELECTOR
<$ Set the input mode to "AUTO"
c.$ Select the DolbylDTS Surround.
'go 'dg
b
(Main unit) lRen1ote Cmtrol urllt!
$1 Play a program source (DVD, etc.).
2
Press the SYSTEM SETUP button and display the System
Setup Menu screen.
(Remote control
mtl
System Setup Menu
FSpeaker Configuration
Delay Time
Channel Level
THX Audio Setup
Subroofer Peak Limit Lev.
Digital In Assignment
;ldeo Input Mode
3
Select "Audio Delay" on the System Setup Menu screen.
uAudio Delay
Multi Zone Control
Auto Surround Mode
Ext. In Setup
IRernote wntrol mt)
Digital Multi Ch In
On Screen Display
Auto Tuner Presets
4
Press jog stick "ENTER" to switch to the Audio Delay
adjustment screen.
llnpul:IOVO
Audio Delay 4 Oms 1
3,4
5,6
K Set the delay time. (0 ms - 200 ms)
(Remote Control unit1 1 J
With a movie source, for example, adjust so that the
movement of the actors' lips is synchronized with the sound.
6
Press jog stick "ENTER" to return to the System Setup Menu
screen.
7
Press the SYSTEM SETUP button to complete the setting.
NOTE:
The audio delay setting does not apply when playing in the EXT. IN
mode or in the analog input direct mode or stereo mode (only when
the crossover frequency is set to "FIXED - THX" or front speaker is
set to "Large").
56