Denon AVR-5803 Operating Instructions Manual page 62

1 Select the surround mode for the input channel.
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
WIDE SCREEN -SUPER STADIUM - ROCK ARENA -
lIIIizl
JAZZ CLUB -CLASSIC CONCERT
MATRIX -
MONO MOVIE -
% WIDE SCREEN is not displayed when the operation IS
oerformed with the button on the marn unit.
-1
2
Display the surround parameter screen on the monitor.
% The screen for the selected surround mode appears.
3
f Press the CURSOR/PAGE button to highlight the
Rmllls
Mm
0
0
display, then use the jog stick to set the parameters.
I
+
cm II)
(Remote control unit)
4
Press the CURSOR/PAGE button so that the display is no longer highlighted,
then press the "SURR. PARA" button to complete the setting.
(Remote conlrol unit)
NOTES:
l
When "Default" is selected and the jog stick is moved to the left, "CINEMA EQ." and "D. COMP." are automatically set to "OFF". In
addition, "ROOM SIZE" is set to "medium",
"EFFECT LEVEL" to "10" and "DELAY TIME" to "30ms".
l
The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
62