Denon AVR-5803 Operating Instructions Manual page 12

l
These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channel
decoder, such as a DVD Audio player, or a multi-channel SACD player, or other future multi-channel sound format decoder.
l
When making connections, also refer to the operating instructions of the other components,
Decoder with 8- or 6-
F
channel analog output
0
I
-
IOOU 1
-
% For instructions on playback using the external input (EXT. IN) jacks, see page 44
l
If another pre-main (integrated) amplifier is connected, the multi-zone jacks can be used to play a different program source in another room at
the same time. (See pages 46, 47.)
RC-616
INFRARED
Extension jacks for future use.
TRlGGkR OUT
DC
12V turns on and off when the
product's power IS turnad on and off
CONTROL ierminai
Perform the following operation before using an external controller connected to the RS-232C terminal:
1. Press the ON/STANDBY button on the maln unit and sat the untt to the operating mode.
2 Perform the operation to turn off the power from the external control.
3. Check that the product has been set to the standby mode.
After checking the above, check the connections of the external controller Operation IS possible.
% For instructions on operations using the MULTI ZONE jacks, see page 43
12