Denon AVR-5803 Operating Instructions Manual page 42

With the exception of the case in 121 below, only the signal connected to the analog input jacks are output from the REC OUT and multi-room
output jacks.
[I] Playing one source while recording another (REC OUT mode)
1 Press the REC/M-ZONE 2 button until
REC I
"RECOUT H=%lc*" appears on the set's
M-ZONE 2
display.
9
(Main unltj
2 Select the source you want to record
FUNCTION
appears on the set's display.
l
The indicator for the selected
program source lights.
ml
1,2 I,4 2,4
(Man UnItI
3 Set the recording mode.
l
For operating instructlons, refer to the manual of the
component on which you want to record.
4 To cancel, press the REC/M-ZONE 2 button twice. Then
select "M-ZONE2 SOURCE".
REC ,
[2] Recording Dolby Digital and DTS multichannel sources
l
With this set it is possible to record Dolby DigItal and DTS
multichannel signals converted into 2-channel analog signals.
l
The recording signals are output to the MULTI ZONE-2 OUT,
TAPE and VCR output terminals.
l
Down-mixed analog signals converted into digital signals are
output from the OPTICAL 5 and 6 digital output terminals at this
time.
1 Press the REC/M-ZONE 2 button until "RECOUT *H*"
appears on the display. Then select "RECOUT SOURCE".
REC I
q (0,
(Man unit)
2
Set the input mode according to the
INPUT
source to be played.
MODE
q Set the surround mode by pressing the DlRECT or STEREO
3
button.
l
The multichannel digital signals are down-mixed and output
to the TAPE and VCR output terminals
NOTES:
l
Recording sources other than digital inputs selected in the REC
OUT mode are also output to the multi source audio/video
output jacks.
l
Digital signals are not output from the MULTI ZONE 1 audio
output lacks.
323
1 1
-3
-3
4
Set the recording mode.
42