Denon AVR-5803 Operating Instructions Manual page 6

14Seven Identical Power Amplifiers
Featuring discrete high current power transistors, the power amp
section is THX Ultra certified for top performance with the widest
range of speaker systems. Rated at 170 watts into 8 t/ohms, the
amp channels feature additional low impedance drive capability.
15.Future Sound Format Upgrade Capability via Eight Channel
Inputs & Outputs
For future multi-channel audio format(s), the AVR-5803 IS provided
with 7.1 channel (seven main channels, plus one low frequency
effects channel) inputs, along with a full set of 7.1 channel pre-
amp outputs, controlled by the 8 channel master volume control.
This assures future upgrade possibilities for any future multi-
channel sound format.
A/D converters are provided for each channel for digital down-
mixing compatibility.
16Dolby Headphone Compatibility
This is a three-dimensional sound technology developed jointly by
Dolby Laboratories and Lake Technology Ltd. of Australia for
achieving surround sound using regular headphones.
0
5 CONNECTIONS
17.DENON Link
This terminal can be used to connect a Denon DVD player for high
quality digital multichannel playback.
18.Auto Surround Mode
This function stores the surround mode last used for an input
signal in the memory and automatically sets that surround mode
the next time that signal is input.
19.Audio Delay
This is a functton for delaying the audio signal with respect to the
video signal. (0 to 200 msec)
2O.Setup Lock
This is a function that locks the system setup and surround
parameter settings, etc., so that they cannot be changed.
l
Do not plug in the AC cord until all connections have been
completed.
l
Be sure to connect the left and right channels properly (left with
left, right with right).
* Insert the plugs securely, Incomplete connections will result in
the generation of noise.
l
Use the AC OUTLETS for audio equipment only. Do not
use them for hair driers, etc.
l
Note that binding pin plug cords together with AC cords or
placing them near a power transformer will result in generating
hum or other noise.
l
Noise or humming may be generated if a connected audio
equipment is used independently without turning the power of
this unit on. If this happens, turn on the power of the this unit.
6