Denon AVR-5803 Operating Instructions Manual page 49

MAIN UNIT: CONTt?OL
Turn the CONTROL knob to adjust the
level of the selected speaker.
Icx
(Main umll
REMOTE CONTROL UNIT:
Move jog stick "ENTER" back and forth 'wwo
to adjust the level of the selected speaker.
0
I SW channel level can be turned off by CM II)
decreasrng one step from -12 dB.
!Remote control unit)
4
REMOTE CONTROL UNIT
Once the channel level adjustment is completed, press the
CURSOR/PAGE button again so that the display is no longer
highlighted, then press the CH. SELECT button.
33 When the surround back speaker setting is set to "Ispkr" for
"Speaker Configuratron", this is set to "SB".
l
This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR)
tog&h.
Use
1
it for example to adjust the balance of the sound from the differ 'ent positions when playing multi-channel music sources.
MAIN UNIT:
Select "FADER" using the FUNCTION
knob after selecting "CH. VOL" with
the MODE SELECT button.
2
REMOTE CONTROL UNIT:
Select "FADER".
MAIN UNIT:
CONTROL
Turn the CONTROL knob clockwise to
adjust the volume of the surround side
collectively. Turn the CONTROL knob
counterclockwise to adjust the volume
IO1
of the front side collectively.
(Main umti
REMOTE CONTROL UNIT:
/
runm1B
Move jog stick "ENTER" to the top side
to adjust the volume of the surround side
collectively.
Move jog stick "ENTER" to the bottom
side to adjust the volume of the front side
collectively.
(agmote COnfrO, "",r,
% The fader function does not affect the SW channel.
X4 The channel whose channel level is adjusted lowest can be faded
to -12 dB using the fader function.
X If the channel levels are adjusted separately after adjustrng the
fader, the fader adjustment values are cleared, so adjust the fader
again.
49