Denon AVR-5803 Operating Instructions Manual page 34

Select "Digital Multi Ch In" on the System Setup
Menu screen, then press jog stick "ENTER".
System Setup Menu
m
xudio Delay
Multi Zone Control
Auto Surround Mode
Ext. In Setup
r?Digital Multi Ch In
On Screen Display
Auto Tuner Presets
Setup Lock
2
To set, select "Yes" and press jog stick "ENTER"
Digital Multi Ch In
Extra Digital In
Sett ink
m4 : rm
Digital Multi Ch In
mDENON Link
imb
Digital Ext. In 1631
3
DENON Link setting :
Set this when connecting a Denon DVD player using the Denon Link terminal.
Set to "ON" if you want to use the terminal, "OFF" if you do not want to use it.
Select "DENON Link" (using the up and down cursor
buttons) then select ON or OFF (using the left and
right jog stick).
When set to "ON", also set the playback input when there is no digital signal.
ANALOG: The analog input of the Input source assigned to Denon Link is played.
EXT-1 : The EXT.IN-1 input is played.
EXT-2: The EXT.IN-2 input is played.
NOTE:
l
When playing using the DENON LINK terminal, also connect the analog external Input terminal (EXT-1) (see page 12) and set the "No
Digital Signal" setting to "EXT-1 ".
Digital Ext. In setting :
This is set for the Digital Ext. In input using the Coaxial 1 to 4 inputs.
DENON Link
4m,
nR+I*R
Select "Digital Ext.ln" (using the up and down cursor buttons) then select
ON or OFF (using the left and right jog stick).
When set to "ON", the four terminals (Coaxial 1 to 4) are assigned to the
desired input source as a single digital multichannel input.
When set to "OFF" the four terminals (Coaxial 1 to 4) are assigned to
uDigital Ext. In 4FHb
individual input sources.
When "ON" was selected at "Digital Ext. In", set the surround back channel input.
If you do not want to use the surround back channel...........NOT USED
If you do want to use the surround back channel, set according to the specifications of the connected player.
4
Mm
Enter the settrng.
The System Setup Menu reappears
34