Denon AVR-5803 Operating Instructions Manual page 61

0
11 DENON ORIGINAL SURROUND MODES
l
The AVR-5803 is equipped with a built-in high performance DSP (digital signal processor) that uses digital processing to recreate sound fields
artificially. Select one of the eight provided surround modes according to the program source you want to play and adjust the parameters to
achieve a more real, powerful sound field.
Select tllis to achieve an atmosphere like that of a movie theater with a large screen. In this mode, all signal sources are played
1
WIDE SCREEN in the 7.1-channel mode. Including Dolby Pro Logic and Dolby Digital 5.lchannei sources. Effects stmulatrng the multi surround
speakers of movie theaters are added to the surround channels.
2 SUPER STADIUM
Select thus when watching baseball or soccer programs to achieve a sound as
If
you were actually at the stadrum Thus mode
provides the longest reverberation srgnals
3 ROCK ARENA Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions.
4 JAZZ CLUB This
mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives jazz a very vivid realism.
5 CLASSIC CONCERT Select this for the sound of a concert hall rich In reverberations.
6
MONO MOVIE
(NOTE 1)
Select thus when watchrng monaural movres for a greater sense of expansron
Select this to emphasize the sense of expansron for music sources recorded rn stereo. Srgnals consrstrng of the difference
7
MATRIX
component of the input signals (the component that provides the sense of expansion) processed for delay are output from the
surround channel.
The front left channel signals are output to the surround and surround back signal left channels, the front right channel signals are
8 5CH/7CH STEREO
output to the surround and surround back signal right channels, and the In-phase component of the left and right channels IS output
to the center channel. Use this mode to enjoy stereo sound.
1
i
% Depending on the program source being played, the effect may not be very noticeable.
In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes
NOTE 1: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left or right), so input
signals to both channels. If you have a source component with only one audio output (monophonic camcorder, etc.) obtain a "Y" adaptor
cable to split the mono output to two outputs, and connect to the L and R inputs.
Personal Memory Plus
This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected for the
input different sources. When the input source is switched, the modes set for that source last time it was used are automatically recalled.
* The surround parameters, tone control settings and playback level balance for the different output channels are memorized for each
surround mode.
61