Specifying The Machine Settings - Konica Minolta Fax Kit (FX-3) User Manual

5.2 Specifying the Machine Settings

5.2 Specifying the Machine Settings
From the "MACHINE SETTING" menu, various settings for the machine's operating
environment can be specified. Refer to the following table for details on each
function.
No. Name
1 AUTO PANEL RESET
2 ENERGY SAVE MODE
3 AUTO SHUT OFF
4 DENSITY (ADF)
5 DENSITY (BOOK)
6 PRINT DENSITY
7 LCD CONTRAST
8 LANGUAGE
9 BUZZER VOLUME
10 INITIAL MODE
Fax Kit (FX-3)
Description
This function can be used to set the length of time until the auto panel
reset operation is performed after copying or the last operation is
finished. When the auto panel reset operation is performed, the Copy
mode screen is automatically displayed.
In Fax mode, the auto panel reset operation is performed after 1
minute has elapsed, regardless of the setting specified for this
function.
• The manufacturer's default setting is 1 min.
For details on this menu, refer to the Di1611/Di2011 User Manual.
The density for printing copies, computer printouts or faxes can be set
to one of five settings.
For details on this menu, refer to the Di1611/Di2011 User Manual.
For details on this menu, refer to the Di1611/Di2011 User Manual.
This function can be used to set the volume of alarms and the beep
sounded when a key is pressed.
• The manufacturer's default setting is "LOW".
This function can be used to set the mode (Copy mode or Fax mode)
that the machine starts up in or returns to after the Control Panel is
reset.
• The manufacturer's default setting is "COPY".
5
5-3