To Change/Delete A Programmed Broadcast Transmission - Konica Minolta Fax Kit (FX-3) User Manual

6
❍ "To fax using mailbox transmission" on page 4-12
❍ "To receive a fax using polling reception" on page 4-24
❍ "To fax using relay initiation transmission" on page 4-14
The settings are registered.
6
To specify other program dialing settings, repeat steps 3 through 5.
7
Press the [No] key to finish
programming.
The "FAX REGISTRATION" menu
appears again.

To change/delete a programmed broadcast transmission

1
Select the "FAX REGISTRATION".
❍ Refer to "Selecting the "FAX REGISTRATION" menu" on page 6-3.
2
Press the [4] key from the 10-Key
Pad to select "PROGRAM DIAL".
3
Press the one-touch dial key ([24]
through [27]) programmed with the
broadcast transmission that you
wish to change or delete.
4
Press the [No] key.
5
Using the [ ] and [Ö ] keys, select
Ö
either "EDIT" or "DELETE", and
then press the [Yes] key.
❍ If "EDIT" was selected, the
specified recipients are
displayed in order. (Continue with step 6.)
❍ If "DELETE" was selected, the program dialing settings are deleted and the
"SELECT REGIST. KEY" appears again.
6-16
6.1 Setting Up the Fax Registration
Fax Kit (FX-3)