To Fax Using Group Dialing - Konica Minolta Fax Kit (FX-3) User Manual

3.1 Dialing

To fax using group dialing

If one-touch dial keys have already been programmed with a group of fax numbers,
the fax numbers of all recipients in the group can be specified by pressing just the
corresponding one-touch dial key.
For details on programming one-touch dial keys with a group of fax numbers, refer
to "Specifying the Setting for "GROUP DIAL"" on page 6-12.
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
❍ For details on placing the document on the Original Glass, refer to "To fax
documents positioned on the Original Glass" on page 3-13.
3
If necessary, change the "Resolution" setting (p. 3-11).
4
Press the one-touch dial key ([01]
through [27]) programmed with the
group of fax numbers that you
wish to send the fax to.
5
Press the [Start] key.
The machine automatically starts
scanning the document and
sending the fax.
Tip
If the wrong one-touch dial key has been pressed, press the [Stop] key, and
then press the [Yes] in the next screen that appears.
Fax Kit (FX-3)
3
3-5