Konica Minolta Fax Kit (FX-3) User Manual page 22

2.2 Names of Control Panel Parts and Their Functions
No. Part Name
21 [Scan] key
22 [Fax] key
23 [Copy] key
24 [Access] key
25 [Energy Saver] key
26 [Interrupt] key
27 [123/ABC] key
28 [Panel Reset] key
29 [Stop] key
Fax Kit (FX-3)
21 22 23
31 30 29 28
Function
Press to enter Scan mode. The indicator lights up in green to
indicate that the machine is in Scan mode.
(Available only when the Network Interface Card NC-6 and the
Internet Fax & Network Scan Kit SU-6 are installed.)
Press to enter Fax mode. The indicator lights up in green to
indicate that the machine is in Fax mode.
Press to enter Copy mode. The indicator lights up in green to
indicate that the machine is in Copy mode.
Used with user management.
Press to enter Energy Save mode.
Press to enter Interrupt mode. The indicator lights up in green
to indicate that the machine is in Interrupt mode.
Press again to cancel Interrupt mode and return to the mode
before Interrupt mode was entered.
If the Interrupt key is pressed while a received fax document is
being printed, printing stops.
Press the Interrupt key again to continue printing the received
fax document.
Press to switch the input mode between numbers and letters.
• Cancels all copy functions and returns them to their default
settings.
• Cancels all fax functions and returns them to their default
settings.
• Deletes all queued jobs.
• Stops the multi-page copy operation.
• Stops the fax transmission or reception.
24
25
26
27
2
2-5