Konica Minolta Fax Kit (FX-3) User Manual page 64

4.1 Transmission Methods
6
Using the 10-Key Pad, enter the
mailbox ID of the recipient.
❍ Enter the mailbox ID (SUB) (20
digits or less) registered for the
recipient.
❍ The only characters that can be used in the mailbox ID are 0 through 9,
and #.
❍ If the recipient is specified using a one-touch dial key or a speed dial number
also programmed with a SUB, the SUB is displayed as the mailbox ID. If
necessary, change the mailbox ID.
❍ If you wish to correct the mailbox ID, press the [No] key, and then enter the
new number.
Note
The same ID cannot be used as the relay box ID and mailbox ID.
7
Press the [Yes] key.
8
Using the 10-Key Pad, enter the
password.
❍ Enter the password (20 digits
or less) if a password has been
set for the recipient's mailbox.
❍
The only characters that can be used in the password are 0 through 9,
and #.
❍ If you wish to correct the password, press the [No] key, and then enter the
new number.
9
Press the [Start] key to begin scanning and sending the fax.
Note
The recipient's machine and mailbox settings must be specified.
In order for the recipient to check fax documents, the mailbox ID is needed.
Fax Kit (FX-3)
4
,
,
4-13