Table of Contents
Advertisement
5
5.1
Utility Mode
There are sixteen menus in the Utility mode.
No.
Name
1
MACHINE SETTING
2
PAPER SOURCE
SETUP
3
USER MANAGEMENT
4
ADMIN. MANAGEMENT
5
COPY SETTING 1
6
COPY SETTING 2
7
FAX REGISTRATION
8
TX OPERATION
9
RX OPERATION
10
COMM. SETTING
11
REPORTING
12
INITIAL USER DATA
13
NETWORK SETTING
14
E-MAIL SETTING1
15
E-MAIL SETTING2
16
SCAN SETTING
* Only the description for specifying settings for the fax functions is described here.
For details on the settings, refer to the Di1611/Di2011 User Manual.
Note
Depending on the installed options and specified installation region, some Utility
mode functions cannot be set.
5-2
Description
Used to specify settings for the machine's operating environment.*
Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
For details on this menu, refer to the Di1611/Di2011 User Manual.
Used to specify the default setting for each fax function.
Used to specify the default setting for TX operation.
Used to specify the default setting for RX operation.
Used to specify the default setting for communicating environment.
Used to specify the default setting for each report function.
Used to specify setting for the initializing user data.
Available only if the optional Network Interface Card NC-6 is installed.
For details, refer to the User Manual for the Network Interface Card
(NC-6).
Available only if the optional Internet Fax & Network Scan Kit SU-6 is
installed. For details, refer to the User Manual for the Internet Fax &
Network Scan Kit (SU-6).
5.1 Utility Mode
Fax Kit (FX-3)
Advertisement
Table of Contents
