Calls Cannot Be Sent - Konica Minolta Fax Kit (FX-3) User Manual

7.2 When Faxing Is Not Performed Correctly

Calls Cannot Be Sent

Symptom
Nothing can be heard from the
connected telephone.
After dialing, the ringing cannot be
heard.
After the [Speaker] key is pressed,
it is difficult to hear the recipient/
caller's voice.
The ringing of the telephone is too
low (loud).
Fax Kit (FX-3)
Possible Cause
The cord from the telephone is
not connected correctly to the
main unit.
The telephone cord from the
wall jack is not connected
correctly to the main unit.
Transmitting.
The telephone dialing system is
not set correctly.
The monitoring volume is too
low.
The ringer volume of the
connected telephone is set too
low (loud).
Remedy
Correctly connect the telephone
cord to the main unit.
Correctly connect the telephone
cord from the wall jack to the
main unit.
Check again after the
transmission is finished.
Correctly set the telephone
dialing system. (p. 6-43)
Increase the monitoring
volume. (p. 6-44)
Adjust the ringer volume of the
connected telephone.
7
7-5