To Fax Using Speed Dialing - Konica Minolta Fax Kit (FX-3) User Manual

3

To fax using speed dialing

If speed dial numbers have already been programmed, the fax number of a
recipient can be specified quickly by entering the corresponding speed dial number.
For details on programming speed dial numbers, refer to "Specifying the Setting for
"SPEED DIAL"" on page 6-8.
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
❍ For details on placing the document on the Original Glass, refer to"To fax
documents positioned on the Original Glass" on page 3-13.
3
If necessary, change the "Resolution" setting (p. 3-11).
4
Press the [Speed Dial] key, and
then use the 10-Key Pad to enter
the 3-digit speed dial number.
5
Press the [Start] key.
The machine automatically starts scanning the document and sending the fax.
Tip
If the wrong speed dial number has been pressed, press the [Stop] key, and
then press the [Yes] in the next screen appears.
3-4
3.1 Dialing
Fax Kit (FX-3)