Konica Minolta Fax Kit (FX-3) User Manual page 66

4.1 Transmission Methods
5
Specify the relay station, and then
press the [Yes] key.
❍ Refer to "Dialing" on page 3-2.
A screen appears, allowing you to
specify the relay box ID.
6
Using the 10-Key Pad, enter the
relay box ID.
❍
Enter the relay box ID (20
digits or less) programmed at
the relay station.
❍
The only characters that can be used in the mailbox ID are 0 through 9,
and #.
❍ If you wish to correct the ID, press the [No] key, and then enter the new
number.
7
Press the [Yes] key.
A screen appears, allowing you to specify the password.
8
Using the 10-Key Pad, enter the
password.
❍ Enter the password (20 digits
or less) if a password has been
set at the relay station.
❍
The only characters that can be used in the password are 0 through 9,
and #.
❍
If you wish to correct the password, press the [No] key, and then enter the
new number.
9
Press the [Start] key to begin scanning and sending the fax.
Fax Kit (FX-3)
4
,
,
4-15