Konica Minolta Fax Kit (FX-3) User Manual page 21

2
No. Part Name
9 [Zoom] key, [M] and [L] keys
10 [Paper] key
11 [Auto/Photo] key, [
[ ] keys
12 [Erase] key
13 [File Margin] key
14 [Finishing] key
15 [X/Y Zoom] key
16 [Neg. Pos.] key
17 [Copy] key
18 [Copy Program] key
19 [Book Separation] key
20 [Original] key
2-4
2.2 Names of Control Panel Parts and Their Functions
Function
• Used to select a preset enlargement or reduction ratio.
• With each press, a zoom ratio between
selected in 0.01 increments.
• Used to specify the selection above or below in setting
screens and menus.
Used to select the size of the paper to be printed on.
] and • Used to specify the scanning density of copies.
• Used to specify the selection at the left or right in setting
screens.
Used to select the area of the document that is erased.
Press to select the "File Margin" function.
Used to select a copy "Finishing" function.
Used to specify different scaling proportions for the vertical and
horizontal directions.
Press to make copies with the dark- and light-colored areas of
the document inverted.
Used to select the "2in1", "4in1" or "Duplex" Copy settings.
• Copy programs can be stored.
• Stored copy programs can be selected and recalled.
Used to select the "Book Separation" function.
• Used to select between the "Duplex Orig." function and the
"Mixed Orig." function.
• If the Fax key was pressed, the "Mixed Orig." indicator lights
up.
The "Duplex Orig." function can be selected only when the
Duplexing Document Feeder is installed.
× ×
0.50 and 2.00 is
Fax Kit (FX-3)