Konica Minolta Fax Kit (FX-3) User Manual page 98

6.1 Setting Up the Fax Registration
❍ For details on F codes (SUB and SID), refer to "Using F codes" on
page 4-26.
7
Press the [M] key, and then use
the 10-Key Pad to enter the SUB.
❍ A number up to 20 digits long
can be entered for the SUB.
❍ To enter an SID, continue with
step 8.
❍ If an SID will not be entered, skip to step 9.
8
Press the [M] key, and then use
the 10-Key Pad to enter the SID.
❍ A number up to 20 digits long
can be entered for the SID.
9
Press the [Yes] key.
10
Using the [ ] and [Ö ] keys, select
Ö
the desired modem speed.
11
Press the [Yes] key.
The settings are registered.
To program another speed dial number, repeat steps 3 through 11.
12
Press the [No] key to finish
programming.
The "FAX REGISTRATION" menu
appears again.
Fax Kit (FX-3)
6
6-9