Tx Operation Settings - Konica Minolta bizhub 162 Facsimile Manual

5
5.5

TX operation settings

From the TX OPERATION menu, various functions for sending faxes can be
set.
No. Name
1 SCAN CONTRAST
2 RESOLUTION
3 DEFAULT TX
4 HEADER
The utility mode settings can also be specified from LSD (Local Setup for Di-
agnostic). For details, refer to "About Local Setup for Diagnostic (LSD)" on
page 7-11.
If optional network interface card NC-502 and scanner unit SU-502 are in-
stalled, settings can also be specified from the network tool PageScope Web
Connection. For details, refer to "What is PageScope Web Connection?" on
page 7-6.
5-46
Characteristic/Description
This function can be used to set the default scanning contrast lev-
el to one of five settings between LIGHT and DARK.
For dark-colored paper (media), select a setting towards LIGHT.
For faint or colored text, select a setting toward DARK.
This function can be used to set the default scanning resolution
(image quality) to one of the following: "Standard", "Fine", "Super
fine", "Half tone + Standard", "Half tone + Fine" or "Half tone +
Super fine".
• Default setting: Standard.
This function can be used to set the default transmission mode to
MEM.TX or ADF TX.
MEM. TX: memory transmission
ADF TX: direct transmission
• Default setting: MEM.TX.
This function can be used to set the default setting (ON or OFF)
for adding the header (date sent, sender's name and fax number,
etc.) when sending faxes.
• Default setting: ON.
Using the utility mode
Fax kit FK-505