Check Digit And Variable Length Label Selections - Wasp Bar Code Laser Scanner Programming Manual

• Set Second Fixed Length —
scanner that the next two programming labels you scan will
define the second fixed label length. Again, this setting can be
any number of digits between 01 and 50 digits. (IBM Interface:
between 01 and 32 digits).
• No Second Fixed Length — scan this label after setting the first
fixed length to instruct the scanner to recognize only the label
length chosen as the first fixed length.
C D
HECK IGIT AND
These programming labels determine whether you compute and send the
check digit contents.
If you want to set the scanner to read only fixed length labels, follow the
procedures on the pages immediately following.
SET -------------------------------------
D '
ON T COMPUTE
C
OMPUTE
D '
ON T TRANSMIT
T
RANSMIT
E
NABLE
D
ISABLE
END -------------------------------------
68
V L
ARIABLE ENGTH
----------------
----------------------
---------------
---------------------
------------------------
-----------------------
Wasp Laser Scanner Programming Guide
use this label to instruct the
L S
ABEL ELECTIONS