Customizing Your Scanner Operation - Wasp Bar Code Laser Scanner Programming Manual

C Y
USTOMIZING OUR
When enabling a new interface, it may be necessary to modify the original
factory settings to match your specific host system's communication and
symbology requirements. Check with your system administrator to
identify your host system's specific interface requirements to ensure that
they match the new interface you've selected. Also, the scanner's opera-
tional features, such as speaker volume, can be customized to match your
unique requirements.
1. Use the labels in this manual to modify the standard configu-
ration to match your specific interface requirements or user
preference.
Ensure that your planned modifications are
compatible with the current interface. For
example, baud rate selections are only valid in
the RS-232 interface. The scanner will sound
an error tone (six rapid beeps) when scanning
programming labels for features invalid to the
current interface.
2. Enable any additional symbologies as required and exit
Programming Mode.
3. Scan a regular bar code label and verify that the scanner and
host communicate correctly.
4. You have completed the factory settings change procedure.
If you experience difficulties, have questions or require additional infor-
mation, contact Informatics, Inc.
4
S O
CANNER PERATION
NOTE
Wasp Laser Scanner Programming Guide