Wasp Bar Code Laser Scanner Programming Manual page 2

Informatics, Inc.
1400 10th Street
Plano, TX 75074
Telephone: (972) 881-5500
Fax: (972) 516-1110
Part Number R44-1568, Rev. B
Wasp and the Wasp logo are trademarks of Informatics, Inc.
This manual and the procedures described in it are copyrighted, with all rights
reserved. Under copyright law, this manual may not be copied in whole or part
without prior written consent from Informatics, Inc. The same proprietary and
copyright notice must appear on any permitted copies as appears on the
original. This exception does not permit copies to be made for others, whether
or not sold. Under the law, copying includes translating into another language or
format including electronic media.
Reasonable measures have been taken to ensure that all information
contained in this manual is complete and accurate. However, Informatics, Inc.
reserves the right to change any specification at any time without prior notice.
IBM® is a registered trademark of International Business Machines Corporation,
NCR is a registered trademark of NCR Corporation, and SNI is a registered
trademark of Siemens Nixdorf Information Systems. Their inclusion in this
manual is for the customer's information and convenience only, and constitutes
neither an endorsement nor a recommendation for these companies' products
or services.
Disclaimer