Pick Mode; Multiple Label Reading - Wasp WDI4200 Quick Reference Manual

Operating Modes

Pick Mode

Specifies the ability of the reader to decode labels only when
they are close to the center of the aiming pattern, which is the
area indicated by the two blue arrows. Pick Mode is a Decoding
and Transmission process where bar codes that are not within
the configurable distance from the center of the aiming pattern
are not acknowledged or transmitted to the host. It is active
only while the scanner is in Trigger Single mode. If the scanner
switches to a different Read Mode, Pick Mode is automatically
disabled.
This feature is not compatible with Multiple Labels Read-
ing in a Volume. See the PRG for more information.
NOTE
PICK MODE
= default value

Multiple Label Reading

The reader offers a number of options for multiple label reading.
See the PRG or software configuration tool for descriptions of
these features and programming labels.
22
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
Pick Mode = Enable
WDI4200