Wasp Bar Code Laser Scanner Programming Manual page 46

S S
ETTING
4. Scan the label representing the symbology whose label
identifier you wish to modify.
In our example, we would scan the 'UPC-A' symbology
label.
5. Identify and scan the digits that correspond to the Hex
Values.
The hex values from the ASCII chart that correspond to
'A1' from our example are as follows: 41
31 = '1'. Thus, we would scan digit programming labels
hex
in this order: 4, 1, 3, 1.
6. Scan the END label.
In our example, you have changed the default label iden-
tifier prefix for UPC-A from 'A' to 'A1'.
SET -------------------------------------
D L
ISABLE
T
RANSMIT
T
RANSMIT
40
S
YMBOLOGY PECIFIC
C
ONTINUED
I.D. C
ABEL ONTROL
L I.D. P
ABEL AS REFIX
L I.D. S
ABEL AS UFFIX
Wasp Laser Scanner Programming Guide
L I (L
ABEL DENTIFIERS
= 'A', and
hex
----
-
-
I.D.)
ABEL