Pick Mode; Multiple Label Reading - Wasp WDI4700 Quick Reference Manual

Operating Modes

Pick Mode

Specifies the ability of the reader to decode labels only when
they are close to the center of the aiming pattern, which is
the area indicated by the red cross. Pick Mode is a Decoding
and Transmission process where bar codes that are not
within the configurable distance from the center of the aim-
ing pattern are not acknowledged or transmitted to the host.
It is active only while the scanner is in Trigger Single mode. If
the scanner switches to a different Read Mode, Pick Mode is
automatically disabled.
NOTE
PICK MODE
= default value

Multiple Label Reading

The reader offers a number of options for multiple label read-
ing. See the PRG or software configuration tool for descrip-
tions of these features and programming labels.
24
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
Pick Mode = Enable
Wasp WDI4700