Table of Contents
Advertisement
Operating Modes
Pick Mode
Specifies the ability of the reader to decode labels only
when they are close to the center of the aiming pattern.
Pick Mode is a Decoding and Transmission process where
bar codes that are not within the configurable distance
from the center of the aiming pattern are not acknowl-
edged or transmitted to the host. It is active only while the
scanner is in Trigger Single mode. If the scanner switches
to a different Read Mode, Pick Mode is automatically dis-
abled.
NOTE
Multiple Label Reading
The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.
20
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
ENTER/EXIT PROGRAMMING MODE
PIck Mode = Disable
Pick Mode = Enable
Wasp WDI7500
Advertisement
Table of Contents
