General Features; Good Read Beeper Settings - Wasp Bar Code Laser Scanner Programming Manual

G F
ENERAL EATURES
The following section contains the general features that are common to all
interfaces. These features allow modification of the scanner's behavior to
accomodate user preferences.
G R B
OOD EAD EEPER
These labels provide options for the scanner's audible 'beep' signal.
Audible Signal—enables/disables the beep upon completion of a
good read.
It is strongly recommended that this feature
remain enabled, as the good read beep pro-
vides the best scanning status feedback to
the user. Error tones are always enabled and
cannot be disabled.
Power-up Beep—when enabled, beeps upon scanner power up.
Beeper Volume—allows setting of the beeper to NORMAL or HIGH
volume.
Good Read Beep Duration—can be adjusted to short (100msec),
medium (250msec), or long (500msec) durations.
When to Beep—may be programmed to announce a 'good read'
upon completion of one of the following events:
• Decode of a bar codes label
• Transmission from the scanner to the host
• CTS activation at the host terminal (RS-232 models ONLY)
80
S
ETTINGS
NOTE
Wasp Laser Scanner Programming Guide