Symbology Options Overview - Wasp Bar Code Laser Scanner Programming Manual

S O
YMBOLOGY
Enable All Symbologies — allows the scanner to auto-discriminate
between all the symbologies in this list. Use this selection only
if you must constantly read a wide variety of symbologies. Turn
to the following pages for enabling additional symbology
specific options.
Disable All Symbologies — disables all symbologies
will only recognize the programming labels contained in this
manual while you are in Programming Mode.
Enable UPC/EAN — tells the scanner to recognize UPC-A, UPC-E,
EAN-8, and EAN-13. If you enable this symbology, additional
options for symbology expansion and reading add-ons are
available. Allows selection of expansion and add-on options.
Enable Code 39 — selects Code 39 as an active symbology. Allows
selection of Check Digit, Start/Stop and Single Digit options.
PharmaCode 39 — is a symbology subset of Code 39. Enabling
PharmaCode 39 selects this special Italian code as the active Code
39 symbology (superceding standard Code 39 features).
Standard Code 39 must be enabled before
PharmaCode can be enabled.
Enable Interleaved 2 of 5 — selects Interleaved 2 of 5 as an active
symbology. Allows change of Check Digit or label format (fixed
or variable length) options.
Enable Standard 2 of 5 —
symbology. Options for this symbology are similar to Interleaved
2 of 5 features.
1 Code 128 is always active for the purpose of reading programming bar code labels,
however, the scanner does not transmit data to the host when in Programming Mode.
Scanning the DISABLE ALL SYMBOLOGIES label will disable Code 128 transmission
to the host.
O
PTIONS VERVIEW
NOTE
selects Standard 2 of 5 as an active
1
. The scanner
47