Removing The Defective Standard Power Supply Unit - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

6.2.1.2

Removing the defective standard power supply unit

Figure 37: Disconnecting power cables
Ê Open the cable clamp and disconnect the short power cable from the system
board (1).
Ê Disconnect the long power cable from the connector on the power supply
unit (2). The power cable can remain in the cable clamps.
Ê Note the position of the power cables.
Figure 38: Detaching the standard power supply unit
Ê Remove the four screws (see circles).
TX2540 M1
Upgrade and Maintenance Manual
Power supply units
115